Investigations of low- and high-spin states of <Superscript>132</Superscript>La

The fusion evaporation reaction ¹²²Sn(¹⁴N, 4n)¹³²La was used to populate the high-spin states of ¹³²La at the beam energy of 60 MeV. A new band consisting of mostly E2 transitions has been discovered. This band has the interesting links to the ground state 2^- and the isomeric state 6^-. A new transition of energy 351 keV connecting the low-spin states of the positive-parity band based on the πh _11/2 ⊗ νh _11/2 particle configuration, has been found. This has played a very important role in resolving the existing ambiguities and inconsistencies in the spin assignment of the band head. Received: 12 August 2002 / Accepted: 18 March 2003 / Published online: 7 May 2003     

Modeling of radiative heat transfer in an axisymmetric cylindrical enclosure with participating medium

Radiative heat transfer in an axisymmetric enclosure with absorbing, emitting, and scattering medium is studied here by using the different methods such as MDOM, FVM, and MFVM with emphasis on the treatment of angular derivative term, which appears in curvilinear coordinates due to angular redistribution. After final discretization equation for MFVM is introduced by using the step scheme and directional weights, the present approach is validated by applying it to three different benchmarking problems with absorbing, emitting, and scattering medium. All of the results presented here support its accuracy as well as moderate efficiency. Finally, the present approaches are applied to a truncated cone-shaped enclosure as a body-fitted geometry case.     

A study on anisotropy of L2 to L3 Coster-Kronig transition (f23) for Th and U elements

The Coster-Kronig transition, f₂₃, was determined using differential fluorescence cross sections of L_l X-ray for Th and U. The targets were irradiated an Am-241 radioisotope at the different incident angle. The L_l X-rays were counted with a Si (Li) detector at the different scattering angle varying from 60° to 90° at 10° intervals. For each angle, the Coster-Kronig transition probability, f₂₃, was found. An obtained Coster-Kronig transition probability value was fitted versus emission angle. According to present results we can say that the Coster-Kronig transition probability, f₂₃, shows isotropic distribution.     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

多夹层板壳的非线性理论及应用（Ⅲ）：扁壳的弯曲和稳定

本文根据文[1]获得的多夹层扁壳非线性基本方程，求解了各种载荷及边界条件下矩形底面多夹层扁壳的非线性弯曲问题，多夹层板、扁柱亮在轴向压力作用下的稳定问题，以及一般形状的扁壳在边界作用力下的变形．     

光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

流-固界面波的激光激发与光偏转检测

基于光偏转原理,研制了可用于流-固界面波探测的光纤传感装置.在此基础上,建立了以调Q Nd∶YAG激光为流-固界面波激发光源的实验系统.实验上探测了激光在空气-铝、水-铝和酒精-铝等界面上激发的界面波波形.根据实验波形,算得在这三种界面上的泄漏Rayleigh波和Scholte波的速度分别为2889 m/s和339 m/s、2916 m/s和1512 m/s、2872 m/s和1184 m/s,此实验值与理论计算值相比,偏差小于5％.     

金锥对靶背向超热电子分布的影响

 采用20 TW啁啾脉冲放大的ps激光辐照金锥靶和平面靶，对靶背向产生的超热电子角分布和能谱进行了实验研究。结果表明:金锥对超热电子的产生具有重要的影响。与平面靶情况相比，锥形靶靶背向产生的超热电子数量增加，电子能量为2.0~2.5 MeV的超热电子数目有大幅度增长；锥形靶背向超热电子的空间发散角大于平面靶,这是由于啁啾脉冲放大激光所固有的较高脉冲前沿产生的预等离子体造成的影响。     

矩形片筏基础的挠度分析

工程上对片筏的力学分析，通常采用温克勒地基模型，且假定床基系数是常量。本则认为床基系数是坐标的函数，考虑了具有线性变化床基系数的地基上的片筏，利用伽辽金法求得周边固支片筏在均布荷载作用下的挠度。所得结果颇具一般性且实用价值更高。     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.